Standard Use (Daily Entry/Exit)

Opening the Door

1. Wake keypad by holding the center button

2. Enter your access code + press #

3. Door unlocks briefly (approx. 5 seconds)

4. Lift handle to engage deadbolt

5. On the inside, press the black button up to hold deadbolt open
⚠️ Only use this button when the door is open and the deadbolt is engaged

Closing the Door

1. Release inside black button (push down)

2. Lower handle to disengage deadbolt

3. Close door from outside

4. Lift handle to re-engage deadbolt

This does not turn off the auto-lock. An admin code is needed to turn the auto lock off during business hours.

Used when opening/closing for the day.

Disable Auto-Lock (Opening)

1. Wake keypad

2. Enter code + #

3. Press 5 + # to disable auto-lock

Enable Auto-Lock (Closing)

1. Close door

2. Enter admin code

3. Confirm auto-lock is re-enabled

4. Engage deadbolt

⚠️ Auto-lock must always be re-enabled at end of day for security.

Remote Unlock

• Visitors may request entry using the * key on the keypad. Long press the button

• Cierra will receive a notification and unlock the door remotely if approved

Temporary Access Codes

• Issued by Cierra for rentals, events, or one-time access

• All temporary codes have set expiration dates and times

Interior access uses your regular code + #

• Inside handle button controls auto-lock engagement/disengagement

• Office door is restricted to authorized staff only

All permanent codes are created and managed by Cierra

• Code changes require a minimum of 48 hours notice

Coming Soon

Before leaving, confirm:

• All doors are closed and locked

• Auto-lock is enabled

• Office and studio are fully secured